|
Analysis
MSI takes full advantage of today's leading software packages including ANSYS, ANSYS CFX, FLOTRAN, Tecplot, NEiNastran, Pro/Mechanica,
and FEMAP to properly set up and analyze your technical issues.
We offer the following types of analyses
- Computational Fluid Dynamics - CFD is one of the branches of fluid mechanics that uses numerical methods and
algorithms to solve and analyze problems that involve fluid flows.
- Finite Element Analysis - FEA can be used to check for potential problems before a product is manufactured or it
can be used to analyze existing products that have failed.
- Rotordynamic Analysis - Rotordynamics is commonly used to analyze the behavior of structures ranging
from jet engines and steam turbines to auto engines and computer disk storage.
- Tribological Component Analysis - MSI takes the principles of friction, lubrication and wear to analyze and
solve your problems.
|
|
Components/Systems Analyzed:
- Active Magnetic Bearings
- Artificial Hip Replacements
- Artificial Knee Replacements
- Axial Compressors
- Axial Gas Turbines
- Axial Pumps
- Axial Split Casings
- Axial TurboExpanders
- Bearings: Journal, Antifriction, Tilting Pad, and Thrust
- Bearing Housings
- Cardiovascular Stents
- Centrifugal Compressors
- Centrifugal Pumps
- Cryogenic Pumps
- Electronic Packaging
- Engine Cooling Fans
- Explosion Percussion
- Filter Cartridges
- Human Artificial Joints
- HVAC Fans
- Hydraulic Turbines
- Lube Systems: Lubricants, Filtration, and Lube Pumps
- Mixed Flow Compressors
- Mixed Flow Pumps
- Multistage High Pressure Compressors
- Oil Monitoring
- Orthopedic Implants
- PCB Surface Mounted Electronics
- Piping and 3D Enclosures
- Product Lubricated Bearings
- Radial Gas Turbines
- Radial Split Casings
- Radial TurboExpanders
- Seals: Labyrinth and Mechanical
- Steam Turbines
- Turbine Cooling Passages
- Turbomachinery Secondary Flow Passages
|
Types of Analysis:
- 2D Planar & Axisymmetric
- 3D Potential Flow
- 3D Component Analysis
- 3D Contact
- 3D Laminar Flow
- 3D Multistage Analysis
- 3D Turbulent Viscous Flow
- Acoustics
- ASME Boiler & Pressure Vessel Code Section III or Section VIII
- Cavitation Analysis
- Conjugate Heat Transfer
- Cracking
- Erosion Analysis
- Failure
- Fatigue
- Fluid Flow
- Forced Response
- Heat Transfer - Steady and Transient
- Large Deformation
- Leakage
- Linear and Non-Linear Capability
- Military Shock Test Simulation
- Particle Flow Analysis
- Plastic Flow
- Power Loss
- Rotor Critical Speed
- Rotor Stability
- Rotordynamic Coefficients
- Rotordynamic Design Audits to API standards
- Stress
- Stress and Deformation
- Thermal
- Torsional Analysis
- Undamped Response
- Vibration and Natural Frequency
- Wear and Degradation
|
Industries Served:
|
